Key Features
- 350W Continuous Power
Alto Mixpack Express Portable 350w Powered PA System - Ex Demo Overview
Ex-Demo: This product may be ex-display, have light signs of use, have slight cosmetic marks or may have non-essential parts or software missing. The original box, packaging or manual may not be included. Each item is checked by our team of repair technicians to ensure it meets our high standards. This is a great opportunity to buy a fully functioning product at a discounted price.
Product Ref: 26826
Full Description
View Full Description MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you're all set. MIXPACK Express also includes two mic cables and two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top.The built-in mixer on MIXPACK Express has 7 input channels with 16 DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, REV ? DELAY and REV ? CHORUS combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.
If you need a sold PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional.
Features / Specifications:
- Portable Powered PA System
- Two 10? speakers with 350 Watt continuous power
- Mixer with digital effects, 7-band graphic EQ and XLR, line and RCA inputs
- Lightweight, one-piece design for convenient transport
- Microphone cables and speaker cables included
- Microphone/Line Input: Electronically balanced, discrele input configuration
- Frequency Response: 10Hz to 55kHz, +/-3dBu
- Microphone Input Impedance: 3.9k Ohms
- Line Input Impedance: 10k Ohms
- Microphone Input S/N ratio: ≥94dBu
- Microphone Inputs: Balanced XLR connectors
- Line Inputs: Balanced / Unbalanced, 1/4' (6.3mm) TRS jack connedctors
- Tape Inputs: Unbalanced RCA jack
- Inputs Distortion: ( THD & N) 0.04 at 0dBu, 1KHz
- Channel EQ: High shelving + / -15dB @12KHz; Low shelving + / -15dB @80Hz
- Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
- DSP Section: 24-bit HALL, ROOM, VOCAL, PLATE, STEREO DELAY, REV + DELAY and REV + CHORUS combinations
- Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
- Output Master: EQ 7-band, ?/?15dB@ 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz
- Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3mm.) MONITOR OUT jack
- System Type: 2-way Coax Vented box
- Frequency Response: 65Hz-20kHz at -10dB
- Spherical horn Coverage: 70° H ?70° V
- Continuous Power: 150Watt AES Standard
- Peak Power: 300Watt Peak
- Protection: Electronic circuit on driver
- Speaker Specification: 10" (254mm) Low Frequency Driver / 2" (50.8mm) Voice Coil, 1" (25.4mm) Neodymium High
- Input Connectors: 1/4" (6.3mm.) mono (TS) jack on each cabinet
- Output Power: 350W (EIAJ)
- Impedance: 4 Ohms
- Protections: Overload/Short Circuit/ Soft Clip Limiter/ Thermal Protection Fan Cooling
- 2 speaker cables
- 1 power cord
- 2 microphone cables
- Stands: F-8 or F-3 are not included
Please Note
This item is an ex showroom display model. There are light scuffs and signs of use around the casing. The original boxing is scuffed and the manual is missing. Otherwise, the unit operates as new.
This is a great opportunity to buy a fully functioning product at a discounted price, supplied with 6 months warranty.
| Reviews of our service
View all
