Dynacord PowerMate 1000-3 10-Channel Powered Mixer - Secondhand

Full Description

High-performance power amplifier

Taking full advantage of Class-D amplifier technology, the 1000-3 delivers audio quality of the highest grade. The mixer provides an RMS output of 2 x 1,000-watts into 4Ω and generates a small amount of heat for a safe, reliable performance.

The power supply is monitored by a microprocessor-controlled switching power supply to save weight and can be used anywhere in the world thanks to the universal automatic mains switching.

Premium channel features

There are six mic/line level channels available onboard the PowerMate 1000-3 and each input features a variety of professional features for a smooth performance. The XLR microphone inputs provide an almost silent operation with extremely low noise, low-hum and incredibly low distortion for low impedance microphones.

Condenser microphone can be used thanks to the inclusion of centrally switchable phantom power. These channels are all adjustable with gain control, switchable 80Hz low-cut filter and an intuitive 3-band EQ for excellent sound shaping abilities. Additionally, there are 2 x FX send, AUX send, MONitor send and panorama and balance controls.

Users can also connect a CD or MP3 player via the RCA inputs. Each input channel includes a signal/peak LED for simple motioning and there is an efficient mute and PFL button available for use.

Professional audio interface

Presented in 24-bit resolution, the digital interface supports sampling rates up to 96kHz for a professional level performance and supplies 2 stereo channels. Available for input and output use at the same time, the USB sends include master L and R with AUX and MON signals.

4 channels can be sent in either direction through the USB port on your PC or Mac and setup is easy with the inclusion of a DVD with Cubase LE and USB drivers.

Flexible effect processing

With 2 x independent 24-bit stereo effects processors, sound engineers can easily mix multiple sounds together with FX 1 and FX 2. Both sections provide 100 presets including studio-grade reverb, delay and modulation effects. The delay time within the delay effect can be matched to the beat of the music using a tap key and similar effects can also be created and stored with 20 user memories available.

Optimal speaker protection

The PowerMate menu allows users to set matching continuous power output levels to any connected loudspeaker for a safe and reliable performance. Damage caused by thermal overload within the loudspeaker can be avoided via dynamic limiting of the maximum output power without effecting the dynamic range. The protection component constantly monitors the energy supplied to the loudspeakers in order to limit the levels when there is a danger of overloading.

Features

• Compact powered mixer
• 2000W total output power
• Lightweight housing
• Intuitively operated mixing section
• 2 editable digital effects devices with 100 presets each
• 20 user memory effects
• Professional 4 x in / 4 x out digital interface
• Stereo equaliser in master section
• Large OLED display
• Class-D amplifier with 2 x 1000W RMS into 4Ω

Specifications

• Channels (Mono and Stereo): 6 and 4
• Auxiliaries (Mon, FX, AUX): 2 Pre, 2 Post, 2 Pre/Post Switchable
• Max Single Channel Output Power, Dynamic-Headroom, IHF-A
  • At 2.66Ω: 2 x 1600W
  • At 4Ω: 2 x 1250W
  • At 8Ω: 2 x 675W
• Max Single Channel Output Power, Continuous, 1kHz
  • At 2.66Ω: 2 x 1350W
  • At 4Ω: 2 x 1150W
  • At 8Ω: 2 x 650W
• Maximum Midband Output Power
  • At 2.66Ω: 2 x 1350W
  • At 4Ω: 2 x 1000W
  • At 8Ω: 2 x 600W
• Rated Output Power
  • At 4Ω: 2 x 900W
  • At 8Ω: 2 x 450W
• Max Output Voltage of Power Amp: 74V RMS
• THD At 1kHz
  • Mic Input To Master A L/R Outputs, +16 dBu, Typical:
  • Power Amp Inputs To Speaker L/R Outputs:
  • DIM 30, Power Amplifier:
  • IMD-SMPTE, Power Amplifier:
• Frequency Response, -3 dB
  • Any Input To Any Mixer Output: 15Hz - 70kHz
  • Any Input To Speaker Output: 20Hz - 30kHz
• Crosstalk, 1kHz
  • Amplifier L/R:
  • Channel to Channel:
  • Mute and Standby Switch Attenuation:
  • Fader and FX/AUX/MON-Send Attenuation: >85 dB
• CMRR, MIC Input: >80 dB
• Input Sensitivity
  • Mic: -74 dBu
  • Line (Mono): -54 dBu
  • Line (Stereo): -34 dBu
  • CD (Stereo): -34 dBu
  • Power Amp Inputs: +8 dBu
• Maximum Level, Mixing Desk
  • Mic Inputs: +21 dBu
  • Mono Line Inputs: +41 dBu
  • Stereo Line Inputs: +30 dBu
  • All Other Inputs: +22 dBu
  • All Other Outputs: +22 dBu
• Input Impedance
  • Mic: 2kΩ
  • Insert Return: 3.3kΩ
  • 2 Track Return & CD In: 10kΩ
  • All Other Inputs: >15kΩ
• Output Impedance
  • Phones: 47Ω
  • All Other Outputs: 75Ω
• Equivalent Input Noise, Mic Input, A-Weighted, 150Ω: -130 dBu
• Noise, Channel Inputs to Master A L/R Outputs, A-Weighted
  • Master Fader Down: -97 dBu
  • Master Fader 0 dB, Channel Fader Down: -91 dBu
  • Master Fader 0 dB, Channel Fader 0 dB, Channel Gain Unity: -83 dBu
• Signal/Noise Ratio: 105 dB
• Output Stage Topology: Class D
• Equalisation
  • LO Shelving: ±15 dB / 60Hz
  • MID Peaking Mono Inputs: ±15 dB / 100Hz to 8kHz
  • MID Peaking Stereo Inputs: ±12 dB / 2.4kHz
  • HI Shelving: ±15 dB / 12kHz
  • Master EQ 9-Band: ±10 dB / Q = 1.5 to 2.5
• Filter
  • Lo-Cut, Mono Inputs: F = 80Hz, 18 dB/oct., Switchable
  • Voice Filter, Mono Inputs: Switchable
  • Feedback Filter, Mon 1/2: 70Hz to 7kHz, Notch, -9 dB
  • Speaker Processing: LPN, Switchable
• Effects
  • Type: Dual Stereo 24/48-Bit Multi Effects Processors
  • Effects Presets: 100 Factory and 20 User, Tap-Delay
  • Remote Control: Footswitch, MIDI
• Display: 128 x 64 Pixels, OLED
• Digital Audio Interface
  • Channels: 4 In / 4 Out
  • AD/DA Conversion: 24-Bit
  • Sampling Rate: 44.1 / 48 / 88.2 / 96kHz
  • PC Interface: USB 2.0, Female Type B
  • Peak Display: 6 dB Before Clip
• MIDI Interface: 5-Pin DIN Connector, In / Out
• Output Power Control (Speaker Protection): Adjustable Longterm RMS Limiter
• Protection
  • Mixer Outputs, Relay Controlled: MON 1, MON 2, MASTER A
  • Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-On Delay, Back EMF
  • Switching Mode Power Supply: Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
• Cooling: Continuous Speed Controlled Fans
• Phantom Power, Switchable: 48V DC
• Power Requirements: 100V to 240V AC, 50/60Hz
• Power Consumption: 450W
• Safety Class: I
• Weight: 14 kg
• Dimensions
  • Height: 135 mm
  • Width: 483 mm
  • Depth: 443.7 mm
• Product Code POWERMATE 1000-3