Shure BLX14E/SM31-T11 Wireless Headset System with SM31FH - Nearly New

Full Description

SM31FH Fitness Headset Condenser Microphone

The focal point of this Shure wireless system is the inclusion of the SM31 fitness headset. The microphone is specially designed for use during sporting activities such as fitness or aerobic instruction. To protect itself from humid environments, the headset features integrated moisture-repelling hydrophobic fabric to resist corrosion. The lightweight construction delivers an unobtrusive performance and a flexible gooseneck design lets you accurately position the microphone where you prefer. A tailored frequency response ensures refined vocals whilst the windscreen prevents interfering noises such as wind and breath.

BLX4 Wireless Receiver

The Shure BLX4 Wireless Receiver features Shure's innovative QuickScan automatic frequency scanning system and microprocessor-controlled true diversity operation, providing incredibly consistent signal reception with minimal setup. The BLX4 receiver comes with both XLR and 1/4" outputs, making it perfect for a wide range of performers including vocalists, guitarists, bassists and more.

BLX1 Bodypack Transmitter

The transmitter included within this Shure wireless system is both lightweight and durable. The compact transmitter fits comfortably in hand and features adjustable gain control, quick and easy frequency matching and a power/battery status LED. The BLX1 can run up to 14 hours of continuous use with AA batteries (included with the system) and has an operating range of up to 100 metres.

Included In The System

• 1 x SM31FH Fitness Headset Condenser Microphone
• 1 x BLX4 Wireless Receiver
• 1 x BLX1 Bodypack Transmitter
• 1 x Carrying Case
• 1 x EU Power Supply
• 1 x Thread Adapter

Features

BLX14/SM31 Wireless Fitness System Set

• Available Transmitter Form Factors: Bodypack
• Operating Range: 100 m

SM31FH Fitness Headset Microphone

• Wearable wireframe headset
• Integrated moisture-repelling hydrophobic fabric
• Flexible gooseneck design
• Lightweight & low-profile form factor
• Includes windscreen
• Tailored frequency response

BLX4 Wireless Receiver

• Up to 12 compatible systems
• Microprocessor-controlled internal antenna diversity
• One touch QuickScan
• Two colour audio status indicator LED

BLX1 Wireless Bodypack Transmitter

• Power & battery status LED
• Adjustable gain control
• Quick & easy frequency matching
• Included AA batteries that provide up to 14 hours of continuous use
• Operating range of up to 100 metres

Specifications

BLX14/SM31 System

• Set Type: Headset
• Wireless Frequency: 863MHz - 865MHz
• Amount Of Bodypacks: 1
• Amount Of TQG Mics: 1
• Number Of Compatible Systems Per Frequency Band: 12
• Selectable frequencies: Up to 150
• Auto Setup Features: QuickScan - finds group with most compatible frequencies and sets to best frequency
• Audio Reference Companding: Yes
• Included Antennas: Internal
• Transmitter Display: LED
• Receiver Display: LED
• Battery, Endurance: 2AA, up to 14h
• Environment: Daily Touring
• Operating Range: 91 m (line of sight - actual range depends on RF signal absorption, reflection and interference)
• Audio Range: 50 Hz - 15 kHz (dependent on microphone type)
• Transmitter RF Output Power: 10 mW, typical (varies by region)
• Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced
• Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
• Battery Life: Up to 14 hours
• Dynamic Range: 100 dB A-weighted
• System Distortion: 0.5 THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
• Operating Temperature Range: -18°C (0°F) - +50°C (122°F)

SM31FH Headset Microphone

• Type: Electret Condenser
• Frequency Response: 45Hz - 20kHz
• Polar Pattern: Cardioid
• Output Impedance: 600Ω
• Audio Output Level: -50 dBV/Pa
• Signal-To-Noise Ratio: 66dB
• Maximum SPL: 145.0 dB
• Dynamic Range: 117 dB
• Equivalent Output Noise: 28 dB
• Power Requirements: +5 V DC, 10 V Maximum
• Main Functionality: Performance
• Cartridge: Fixed
• Cable: 1.1m
• Connector: TA4F
• Net Weight: 60 g

BLX4 Wireless Receiver

• Transmission: Analog
• Type of Power Supply: External
• Receiver Housings: Moulded ABS
• Number Of Compatible Systems Per Frequency Band: 12
• Scan Features: Quick Scan
• Rack Hardware: Optional URT2
• Receiver Displays: LEDs
• Receiver Type: Single
• Image Rejection: 50 dB, Typical
• RF Sensitivity: -105 dBm, For 12dB SINAD, Typical
• Weight: 241g
• Dimensions
  • Height: 40mm
  • Width: 188mm
  • Depth: 103mm

BLX1 Wireless Bodypack Transmitter

• Form Factor: Bodypack
• Operating Range (Up To): 100 m
• Battery Life Alkaline: 14 h
• Transmitter Housings: Moulded ABS
• Batteries: AA
• Battery Status: Multi-Colour LED
• Connectors: TQG
• Functionality: Transmitter
• Gain Adjustment Range: 26 dB
• Included Antenna: 1/4 Wave
• Input Impedance: 1 MΩ
• Weight: 75g
• Dimensions:
  • Height: 110mm
  • Width: 64mm
  • Depth: 21mm