Key Features
- 1-in 2-out balanced audio switcher with remote capabilities
- Easy signal switching with military grade gold contact sealed relays
- Free from distortion and artefacts from full-size hand-inserted parts
- Optimal protection via 14-gauge steel I-Beam enclosure
Radial Relay Xo Balanced Remote AB Switcher Overview
Small, powerful and compact. The Radial Relay Xo Balanced Remote AB Switcher is the perfect tool for routing the output of a microphone to two separate locations. Utilising military-grade gold-contact sealed relays and full-size hand-inserted parts, the Relay Xo can switch signal paths quickly and easily whilst maintaining a pristine audio signal flow.
The device can be controlled remotely using one of the Radial JR1 footswitches (not included), whilst a remote link socket enables you to use multiple Relay Xo units in tandem. The device is perfect for use with microphones and instruments for switching between dry and wet channels or even switching the output from a PA to an intercom for convenient communication.
The Radial Relay Xo features a robust 14-gauge steel enclosure and premium-grade components with Radial's signature book-end design, resulting in an incredibly robust and reliable AB switcher suitable for a wide variety of applications.
Product Ref: 58639
Full Description
View Full DescriptionFeatures
- Enables you to switch a vocal microphone from the PA to intercom
- Allows an artist to speak with musicians and technicians
- Remote controllable using the JR1 footswitch (not included)
- Route any balanced signal to two destinations
- Built-in cable clamp prevents accidental power disconnection by locking down the AC adapter cable
- Full-bottom no-slip pad provides electrical isolation and plenty of friction to keep the Relay Xo in place
- Gold-sealed military-grade relays are used to switch the audio signal and provide a straight wire signal path
- Full-size hand-inserted parts ensure the audio signal flows without impediment from input to output without distortion or artefacts
- Extra-durable switches with metal outer-casings that are rated for over 20,000 cycles
- Isolated XLRs with heavy-duty glass-filled XLRs with nickel-silver contacts that are stronger than steel
- Double-sided military-spec PCB provides greater durability whilst the full ground plane reduces radio frequency interference
- Book-end design creates a protective zone around the jacks and switches
- 14-gauge steel I-beam enclosure makes it impossible to torque the PCB and eliminates cold solder joints from developing
Specifications
- Audio Circuit Type: Remotely-Controlled Mechanical Relay
- Frequency Response: 10Hz to 100kHz
- Total Harmonic Distortion:
- Dynamic Range: >140dB
- Input Impedance: Source dependant
- Output Impedance: Source dependant
- Common Mode Rejection: -106dB
- Maximum Input: +26dBu
- Phase Shift:
- Gain: 0dB
- Noise Floor: -115dBu
- Intermodulation Distortion: 0.001 percent
- Controls: None
- Switches: A/B switch, ground lift
- Ground Lift: XLR Output B only
- Audio Connectors: XLR-F input, 2 x XLR-M outputs
- XLR Configuration: AES standard
- Pin-1: Ground
- Pin-2: (+)
- Pin-3: (-)
- Remote Connectors: Combo (XLR-F and 1/4''), 1/4'' loop-through
- Contact Closure Function:
- With 1/4'' TRS Jack: Short tip and ground to switch
- With XLR: Short pin-1 ground and pin-2 Hot to switch
- Construction: 14-gauge steel with internal I-beam
- Finish: Durable powder coat
- Power: 15VDC, 30mA, centre-positive
- Conditions: For use in dry locations only between 5°C and 40°C
- Dimensions:
- Length: 127mm / 5''
- Width: 84.1mm / 3.3''
- Depth: 45.5mm / 1.8''
- Weight: 0.64kg / 1.4lbs
- Product Code: R800-8030-00
Your order may be delivered with a plug adapter
Any electrical items in your order may have a United Kingdom or EU plug connection. A suitable plug conversion adapter will be included with these items if required, free of charge.
| Reviews of our service
View all
