Key Features
- 8 Ohm guitar speaker attenuator and simulator combination
- Capable of safely handling up to 130W RMS power (180W peak)
- Fine tune your sound via the on-board equaliser
- Rugged build ensures long-lasting-life
Radial Tonebone Headload V8 Guitar Amp Load Box Overview
Take your tone to the next level with the Radial Tonebone Headload V8 Guitar Amp Load Box. Whether you're performing, or recording. This is the ultimate accessory for any guitarist truly serious about achieving the best tone possible. Capable of safely handling up to 130W of RMS power (180W peak), the Headload V8 is an 8 Ohm load box with a built-in Radial JDX Reactor and Radial Phazer for high-performance direct recording.
The Headload allows you to achieve exceptional tone and sonic performance from your amplifier at low volumes, making it perfect for both studio and live scenarios. The 100 percent discrete design is fan-cooled with additional front vents, and boasts adjustable load from 100 percent down to 0 percent, with additional power control from 0 to 20 percent with the RANGE control.
An active High/Low shelving EQ and cabinet emulation section ensures you find the perfect sound. You're guaranteed exceptional protection and reliability thanks to the 14-gauge steel chassis and outer shell. What are you waiting for? Achieve tones that others envy today!
Product Ref: 43256
Full Description
View Full DescriptionFeatures
- Robust speaker attenuator and simulator combination
- Safely handles up to 130W RMS (180W peak)
- Radial JDX Reactor and Phazer built-in for direct recording
- Phenomenal tone from your amplifier at low volumes
- Front vents allow cool air to circulate - driven by the rear-mounted fan
- Low/High shelving EQ for fine-tuning the JDX output to suit your recording or live monitoring needs
- Removable handle ideal for use with the optional rack-mount kit (rack-mount kit not included)
- Rear mounted fan keeps the Headload cool and prevents overheating
- Optional 19'' rack rail adaptors are available for the Headload (not included, must be purchased separately)
Specifications
- Audio Circuit Type: Passive attenuation circuit with active equalization
- Frequency Response: 90Hz at -3dB to 4kHz at -6dB
- Low EQ: +/-9dB at 80Hz
- High EQ: +/-9dB at 6kHz
- Low & High Resonance: 60Hz & 6.5kHz, shelving filter 6dB/octave slope
- +12dB at 20 percent load setting
- +9dB at 40 percent load setting
- +6dB at 60 percent load setting
- +3dB at 80 percent load setting
- None at 100 percent load setting
- Headphone Output Power: 400mW into 32 Ohms
- Headphones Impedance: 32 Ohms or higher recommended
- Gain: -40dB typical
- Intermodulation Distortion:
- Noise: -104dBu unweighted
- Input Impedance: 8 Ohms
- Output Impedance: 250 Ohms
- Total Harmonic Distortion:
- Gain Reduction: Variable from 100 percent to 0 percent
- Equalization: Low and high frequency shelving
- Load: 8 Ohms
- Construction: 14-gauge steel chassis and outer shell
- Finish: Conditions: For use in dry locations only between 5°C and 40°C
- Power: Radial +/-15V 4-pin 500mA power supply
- Size (L x W x D): 6.05'' x 12'' x 3.45'' / 154mm x 305mm x 87.6mm
- Weight: 8lbs / 3.63kg
- Product Code: R800-70580-00
Your order may be delivered with a plug adapter
Any electrical items in your order may have a United Kingdom or EU plug connection. A suitable plug conversion adapter will be included with these items if required, free of charge.
| Reviews of our service
View all
