OFFLINE Sennheiser EW-DX Dual Wireless System with MKE2 and 835-S, U1/5 Band

Full Description

New and improved technology

The EW-DX system is a new step forward for their digital UHF technology. Advanced features, simple and easy workflow, and reliable sound quality combine to make a professional system that's expandable and well-suited to everything from modest live music venues to gigantic arenas and festivals.

Easy control

Sennheiser have developed the new EW-DX system to be as simple, customisable, and easy to use as possible. Auto Scan automatically assigns channels to each transmitter and receiver in your system with even tuning to prevent interference while offering as much space for channels as possible. Utilising deep software control from mobile via the Sennheiser Smart Assist app, or deeper control and customisation from the Sennheiser Control Cockpit and Wireless Systems Manager on computer.

Stable transmission and clear sound

Sennheiser have spent time developing improved dynamic range and minimal latency to ensure that their EW-DX systems sound clean, clear, and responsive. They didn't stop there either, as this new range features their own proprietary audio codec SePAC and brand-new conversion to make sure your audio is accurate and full. Plus, Intelligent Switching Diversity allows switching of antennas between audio frames to eliminate artifacts.

What's in the box

• 1 x EW-DX rack receiver
• 1 x EW-DX SKM-S handheld transmitter
• 1 x MMD 835 microphone capsule
• 1 x EW-DX SK bodypack transmitter
• 1 x MKE2 lavalier microphone
• 1 x EW-D power supply with country adapters
• 2 x BA 70 rechargeable battery packs
• 1 x MZQ 1 microphone clamp
• 2 x rod antennas
• 1 x GA 3 rackmount kit
• 4 x rubber feet

Features

• Dual wireless system for professional live sound
• Well-suited to larger venues and events
• Consists of handheld wireless microphone with 835-1 capsule, lavalier microphone, bodypack transmitter, stationary receiver and two batteries
• Network enabled for wireless remote control from a broad range of apps and software
• Secure AES 256 encryption for secure audio transmission
• High input dynamic range removes need to set gain on transmitters
• Proprietary Sennheiser Performance Audio Codec SePAC maintains audio quality and clarity
• Up to 100 m operating range with line-of-sight
• Charging contacts for in-device charging
• High battery life from included rechargeable lithium ion battery for up to 12 hours of use
• Function buttons for instant on-board transmitter setting control
• Equidistant channel spacing maximises available channels while preventing interference
• Switching bandwidth of up to 88 MHz
• Ultra-low 1.9 ms latency for highly responsive audio
• 3.5 mm jack plug suitable for use with Sennheiser headsets and lavalier microphones
• Digital audio trim for level setting
• Test tone generator allows you to check your system is up and running
• Switchable LED configuration for on/off display
• Switchable low-cut filter at 30, 60, 80, 100, or 120 Hz for cutting low-frequency rumble
• Handheld transmitter utilises Sennheiser Standard Capsule Interface for use with Sennheiser and Neumann microphone capsules (sold separately)

Specifications

System

• Audio Link Frequency Range: U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz
• Bluetooth Low Energy (BLE) Frequency Range: 2405 - 2480 MHz
• Audio Frequency Response: 20 Hz - 20 kHz (-3 dB) @ 3 dBFS
• Total Harmonic Distortion: ≤ -60 dB for 1 kHz @ -3 dBFS input level
• Dynamic Range: 134 dB
• RF Technology: Intelligent Switching Diversity
• Operating Temperature: -10°C - +55° C (14°F - 131°F)
• Operating Relative Humidity: 5 - 95% (non-condensing)

EW-DX EM 2 Rack Receiver

• Input Voltage Range: 11 - 13 V DC or PoE IEEE 802.3af Class 0
• Input Current: ≤ 1 A
• Transmit Power (radiated): BLE: max. 10 mW EIRP
• Audio Output Power: 18 dBu max.
• Ethernet:
  • RJ-45 socket, IEEE802.3
  • 100Base-TX (half+full duplex)
  • 10Base-T (half+full duplex)
  • (CAT5e or higher)
• Dimensions: 212 x 44 x 189 mm
• Weight: approx. 1000 g (2.2 lbs) (without batteries or antenna)

EW-DX SKM Transmitter

• Input Voltage: 2.0 - 4.35 V
• Input Current: ≤ 300 mA
• Power Supply: 2 AA batteries 1.5 V (alkaline manganese) or BA 70 rechargeable battery pack (sold separately)
• Occupied Bandwidth: 200 kHz
• Transmit Power (radiated):
  • Audio link: 10 mW ERP
  • (Range Y1 - 3): 12 mW ERP
  • LD mode: 10 mW ERP
  • BLE: max. 10mW EIRP
• Dimensions: 40 x 200 mm (without microphone module)
• Weight without batteries: approx. 195 g (without microphone module)

MMD 835 Microphone Module

• Transducer Principle: Dynamic
• Sensitivity: 2.1 mV/Pa
• Sound Pressure Level: 154 dB SPL
• Pick-up Pattern: Cardioid

EW-DX SK Bodypack Transmitter

• Input Voltage: 2.0 - 4.35 V
• Input Current: ≤ 300 mA
• Power Supply: 2 AA batteries 1.5 V (alkaline manganese) or BA 70 rechargeable battery pack
• Occupied Bandwidth: 200 kHz
• Transmit Power (radiated):
  • Audio link: 10 mW ERP
  • (Range Y1 - 3): 12 mW ERP
  • LD mode: 10 mW ERP
  • BLE: max. 10mW EIRP
• Dimensions: 63 x 80 x 20 mm (without antenna)
• Weight: approx. 120 g (without batteries)

MKE2 Lavalier Microphone

• Transducer Principle: Pre-polarised condenser microphone
• Pick-up Pattern: Omnidirectional
• Sensitivity in Free Field, no load (1 kHz): 5 mV/Pa ± 3 dB
• Max. SPL at 1 kHz: 142 dB
• Frequency Response: 20 Hz - 20 kHz
• Equivalent Noise Level (A-Weighted): 26 dB
• Connector: 3.5 mm jack
• Cable Length: approx. 1.60 m (62.99")
• Supply Voltage: 7.5 V