DISC JBL M-Patch Active-1 Monitor Controller

Full Description

Flexible Connectivity and Intuitive Control

Integrate your studio devices with ease. The JBL M-Patch Active-1 Monitor Controller can accommodate up to four input sources. With the ability to connect up to three stereo analog sources and one USB source, you can control and monitor a wide variety of devices and equipment. You can also connect up to three stereo analog outputs, as well as a USB output.

Take advantage of seamless A/B switching between input signals and output speaker monitor systems, whilst an additional array of functions lets you precisely handle volume control, mono summing, muting, and dimming (ducking). The M-Patch Active-1 also boasts a talk-back function with an integrated condenser mic that can be routed in a range of configurations. Talk-back can be activated via a footswitch (not included) connected to the 1/4'' input in the rear of the controller.

Plus, with on-board USB connectivity, direct digital audio recording and playback can be achieved when used in conjunction with your computer's DAW. The M-Patch Active-1's rugged metal housing and durable switches and connectors ensure you can enjoy years of trouble-free use in even the most demanding of studios.

Features

• Accommodates four input sources (3 x stereo analog and 1 x USB) and three stereo analog outputs plus USB
• Seamless A/B switching between input signals and output speaker monitor systems
• Delivers a full complement of audio monitoring functions including precision volume control, mono summing, mute, and dim (ducking)
• Handy footswitch-activated talk-back function complete with an on-board condenser microphone and selectable routing
• Designed to provide the lowest-noise operation possible in an active monitor controller
• Ideal for applications where both signal attenuation and boost are needed
• LED level metering and convenient switch-selectable +4dBu/-10dBV input stage operation
• On-board USB for direct digital audio recording and playback when used with your computer DAW
• USB output mirrors the signals appearing at the analog 2-track outputs, whilst computer's L/R output feeds the USB input
• Housed in a sturdy metal chassis and fitted with a durable array or switches and secure connectors
• Designed to provide you with years of worry-free use

Specifications

• Audio Inputs:
  • Input Connectors: 4 x TRS 1/4'' (6.5mm) balanced/unbalanced
  • Maximum Input Level: +4dBu/+22dBu
  • Impedance: 24K Ohms balanced, 12K Ohms unbalanced
  • Computer Audio Input: USB 2-channel
• Audio Outputs:
  • Output Connectors: 6 x TRS 1/4'' (6.5mm) balanced/unbalanced
  • Impedance: 300 Ohms balanced, 150 Ohms unbalanced
  • Output Level: +22dBu
  • Master Volume Gain: 34dB (Studio Outputs)
  • Computer Audio Output: USB 2-channel
  • Headphone Output: 2 x 1/4'' (6.5mm) TRS stereo output
  • Headphone Output Level Gain: +32dBu
• Dim Switch: -20dB
• Frequency Response: 10Hz to 30kHz, +0.5/-1dB (Line IN/Line OUT)
• Noise: >-92dBu typical (Monitor A B, Studio Outputs, 2-Track)
• Channel Cross Talk: >92dB (at 1kHz, Mute/Level OFF)
• Dynamic Range: 114dB (Line IN to Line OUT)
• Distortion: <0.009-percent
• USB I/O Digital Performance: 48kHz, 24-bit
• Computer Interface:
  • Format: USB1/2
  • Channels: 2
  • Drivers: Legacy type and ASIO
  • Compatibility: All current USB audio systems
• Power Requirements: AC 9V, 1200mA (power supply included)
• Dimensions: 330mm x 191mm x 127mm / 13'' x 7.5'' x 5'' (W x D x H)
• Weight: 0.9kg / 2.0lbs

Connectivity and Controls

• Inputs:
  • Source A: Stereo RCA inputs
  • Sources B and C: Two stereo sets of 1/4'' (6.5mm) input connectors
  • Source D: USB input (integrated Legacy-compatible driver, doesn't need mains power to operate, ASIO driver also available from the JBL Professional website)
• Outputs:
  • Outputs A and B: Two stereo sets of 1/4'' (6.5mm) TRS connectors
  • Output 2T: 2-track, 1/4'' (6.5mm) TRS connectors that can include the talkback signal
  • Source D: USB output (integrated Legacy-compatible driver, doesn't need mains power to operate, carries the same signal that is selected using the MAIN SOURCE input)
• Talk Back Footswitch Jack: 1/4'' TS jack for connecting a footswitch for activating the Talk Back system (footswitch not included)
• +4/-10dB Output Level Switch: Selects the output level to allow compatibility with pro and consumer devices
• A/B/C/D Switches: For selecting the input signal you wish to monitor
• Headphone Amplifiers: Two independent 1/4'' jacks for connecting headphones, each with their own dedicated volume control
• Dim Switch: Activating decreases the level of the outputs by 20dB. Effectively reduces the output signal and listening level to allow discussion in the control room without having the change the volume knob settings
• Mute Switch: Activating this switch prevents any signal output
• Mono Switch: Activating this switch lets you listen to the audio outputs in monophonic mode. This combines the stereo audio signal into a monophonic signal, which is perfect for checking any phase cancellation issues in the stereo signal
• Volume Control: Controls an electronic circuit which in turn adjusts the level of the audio going through the device, providing gain increase as well as attenuation
• Talk Back Switches and Volume: Built-in talk back microphone which can be routed to the headphone outputs or 2-track outputs. When the Talk Back function is engaged, the Control Room output signal is attenuated by 20dB
• Monitor Select Switches: Activated the A and B outputs respectively. Both A and B outputs can be selected simultaneously