Dynaudio BM6A Studio Monitor, Single

Full Description

Frequency Boost/Cut Switches

The Dynaudio BM6A is a flexible monitor that allows you to adjust its frequency response to give you the most accurate audio depending on its position in a room. The BM6A is designed to produce accurate audio and give you maximum transient response, allowing you to hear all the frequencies clearly so you can create clean, punchy and powerful mixes and masters. The fine-tune controls allow you to tailor its frequency response to perfectly suit the room you are in. The BM6A monitor is equipped with low and high frequency knobs that allow you to boost or cut the frequencies. The low frequency section uses a special equaliser design that effectively swaps bandwidth for power. When you turn the LF trim level down, the low frequency extension is improved. These trim level knobs allow you to adjust to personal taste or compensate for frequencies that may stand out too much when the monitor is placed on shelves, tables, or at varying distances between walls. This makes sure you are hearing accurate audio, not muffled by unwanted and amplified frequencies.

Premium-Quality Components For Professional Sound

The Dynaudio BM6A features a range of premium-quality components that ensure optimal audio quality. The BM6A is equipped with handcrafted drivers with aluminium voice coils for superb signal quality, ensuring maximum transient response. The studio monitor also features an electronic 4th order phase-aligned crossover with a crossover point at 2.2kHz. This feeds 2 high performance discrete MOSFET amplifiers rated at 100W each. The BM6A is equipped with a complex protection circuit that not only prevents accidental damage to the drivers, but helps to provide maximum transient response. The BM6A features a frequency range of 41Hz - 21kHz with a max SPL of 118dB, allowing you to hear every nuance of the original audio as it was intended, making it ideal for recording, mixing and mastering. Additionally, the BM6A is housed with an elegant matte cabinet with radius edged construction on the front baffle which reduces any boundary effects to improve overall sound quality.

Features

• 2 high performance discrete MOSFET amplifiers
• 4th order phase-aligned crossover
• Handcrafted drivers with aluminium voice coils
• Max SPL of 118dB
• Frequency response of 41Hz - 21kHz
• HF and LF trim level knobs for flexible room positioning
• Low frequency section uses a special equaliser design that effectively swaps bandwidth for power
• Housed with an elegant matte cabinet with radius edge construction that reduces boundary effects to improve overall sound quality

Specifications

• System: 2-way active nearfield monitor
• Frequency Response: 41Hz - 21kHz
• Max SPL 1m, Pair (IEC Long Term): 118dB RMS
• Max SPL 2m, 5.1 (IEC Long Term): 119.5dB RMS
• Input Level For Max Peak SPL (+4/-10): +16dBu peak / -1dBu peak
• Power Consumption: Idle (25W) / max (200W)
• Tweeter Amplifier Power: 100W
• Woofer Amplifier Power: 100W
• Resonance Frequency: 49Hz
• Internal Cabinet Volume: 9.5 liters
• Principle: Bass reflex
• Crossover Frequencies: 2.2kHz
• Crossover Slope: 24dB/oct
• Tweeter: Esotec 28mm soft dome, rear chamber, magnetic fluid, 4mm die-cast alu front, 17cm, 75mm pure alu wire voice coil
• Woofer: One piece molded polypropylene cone
• Weight: 11kg
• Dimensions: 217 x 338 x 321mm