PreSonus Sceptre S6 CoActual Studio Monitors (Pair) with Stands
Key Features
- Symmetrical Soundstage and Micro-Definition Imaging
- 6.25-inch Midrange Driver and 1-Inch Horn-Loaded HF Transducer
- Sensitivity (+4 DBu to -10 DBv)
- Balanced XLR and 1/4-Inch TRS Line-Level Inputs
- Internal Power Supply Included with Connector
PreSonus Sceptre S6 CoActual Studio Monitors (Pair) with Stands Overview
Expect a crisper stereo image, greater soundstage depth, separation between your sounds in a mix, and less listening fatigue. Mix professionally with the PreSonus Sceptre S6 Monitors.
Product Ref: 44821
Full Description
View Full Description The Sceptre S6 CoActual Studio Monitor combines a 6.25"-inch low/mid frequency driver and a 1-inch horn-loaded, high-frequency transducer into a single coaxial unit with aligned voice coils and front-firing acoustic ports. The first time you hear Sceptre-series CoActual 2-Way studio monitors, you'll discover fine nuances of your music that can't be reproduced by conventional designs.Panoramic Soundstage
The Sceptre's panoramic soundstage, fine detail and stunning dynamics will astonish you. This exceptional performance is the result of an advanced coaxial design that works integrally with a 32-bit processor running Fulcrum Acoustic's TQ Temporal Equalisation Technology. The processor is used to manage horn reflection, linear time and amplitude anomalies correction, performance contouring and dynamic excursion limiting.
Custom Transducers
PreSonus CoActual technology is at the heart of every Sceptre-series studio monitor and a combination of custom transducers in a state-of-the-art coaxial design with heavy-duty DSP running TQ algorithms. In addition to making possible the Sceptre's coaxial design, the monitor's onboard DSP provides user-adjustable contour features for optimising the monitors for your mixing space. This enables full integration into any studio environment.
Features
- CoActual technology combines DSP time-correction and point-source design for a symmetrical soundstage and micro-definition imaging
- Unique coaxial transducer integrates 6.25-inch midrange driver and 1-inch horn-loaded HF transducer with CoAxial SDpeaker Coherence Alignment
- Powerful DSP provides critical Temporal Equalisation with multiple FIR filters
- Acoustic-tuning controls:
- HF Driver Adjust (0dB, -1.5 dB, -3 dB, -6 dB)
- Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
- High-pass filter (Off, 60 Hz, 80 Hz and 100 Hz, -24 dB/Octave slope)
- Sensitivity (+4 dBu to -10 dBv)
- 180W RMS, Class D biamplification with internal heat sink
- RF Shielding, current-output limiting and over-temperature protection
- Balanced XLR and 1/4-inch TRS line-level inputs with A-taper level control
- Amplifier 'soft start' feature eliminates popping on power-up
- 102 dB maximum continuous SPL
- Internal power supply included with connector
- Power switch with on/off LED
Specifications
General- Power: 100 - 120V 50/60 Hz or 220-240V 50/60Hz
- Cabinet: Vinyl-Laminated, medium-density fiberboard
- Balanced XLR
- 1-Balanced 1/4" TRS
- Frequency Response (-3 dB): 52 Hz - 20 kHz
- Frequency Response (-10dB): 42 Hz - 23 kHz
- Crossover Frequency: 2.2 kHz
- LF Amplifier Power (@ 4 Ohm): 90W
- HF Amplifier Power (@ 4 Ohm): 38 Hz - 23 kHz
- Peak SPL (@ 1 meter): 109 dB
- LF Driver: 6.25" glass reinforced paper
- HF Driver: 1" diaphragm compression driver
- Input Impedance: 10 k Ohm
- Volume Range: A-type taper
- HF Control: Flat, +1, -1.5, -4 dB
- Low Cut: Flat, 60, 80 Hz, 100 Hz
- Acoustic Space: Flat, -1.5, -3, -6 dB
- RF Interference
- Over-Current
- Over-Voltage
- Over-Temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
- Width (mm): W 230 x D 260 x H 335
- Weight (kg): 8.53
Your order may be delivered with a plug adapter
Any electrical items in your order may have a United Kingdom or EU plug connection. A suitable plug conversion adapter will be included with these items if required, free of charge.
| Reviews of our service
View all
