Zoom V6 Vocal Processor

Full Description

Find your voice

Offering you dozens of different and varied effects, the V6 processor allows you to change how your voice sounds - in the studio and on stage. Whether you want to add harmonies, effects, or vocoder - the V6 makes it easy. You can select your desired voice from 12 different options. These include everything from Unison effects to pitch correction. Meaning you can explore the boundaries of your vocal performances on the fly, thanks to intuitive foot controls. You can easily add harmonies. Adding up to two backing vocals to create perfect three-part harmony. And with a marked harmony dial - selecting the ideal backing has never been easier. The effects range from delays, chorus, and reverbs - meaning you can add and change effects whilst in the middle of your performance. It couldn't be easier.

Custom microphone for improved accuracy

One of the most important parts of the system is the microphone itself. The V6 ships with an SGV-6 microphone which allows you to perform with total isolation. This is important when using the V6 because it prevents the unit from picking up other instruments - potentially ruining the effect. Thankfully, the custom microphone prevents. You're performing at your best, so should your gear.

Features

• V6 offers over 10 studio-grade effects
• Simultaneously use up to three vocal processors from the Voice, Harmony and Effect sections
• Includes highly directional SGV-6 shotgun microphone to isolate your vocal to allow enhanced processing
• Formant Shift pedal for adjusting your vocal character in real-time
• Looper for recording up to 3:30
• 40 preset patches created by professional vocalists and audio engineers
• 100 memory locations for storing user-created patches
• Built-in compressor for optimizing input signal levels
• Built-in Enhancer for optimizing input signal frequencies via equalization and de-essing
• USB 2.0 audio interface capable of recording up to 16/24/32-bit, 44.1 kHz
• USB port for firmware updates, power and audio recording
• Line output for connecting to external mixing consoles
• Headphone output with dedicated volume control
• Runs for 3.5 hours on four AA batteries
• Included AC adapter
• Optional expression pedal offers advanced control over effects parameters

Specifications

• VOICE section: 12 types
• EFFECT section: 10 types
• HARMONY section: 5 types
• Number of patch memories: 100
• Sampling frequency: 44.1 kHz
• A/D conversion: 24-bit 128× oversampling
• D/A conversion: 24-bit 128× oversampling
• Signal processing: 32-bit
• Frequency response: 20 Hz–20 kHz (+1 dB/−3 dB) (200 kΩ load)
• Display: 2-digit 7-segment LED
• Input:
• Input gain: +3 – +40 dB
• Maximum input level: +4 dBu
• Input impedance: 3 kΩ or higher (1 kHz)
• Phantom power: +48 V
• Outputs:
• Maximum output level: +8 dBu
• Output impedance: 50 Ω (HOT-GND, COLD-GND, 1 kHz), 100 Ω (HOT-COLD , 1 kHz) GROUND LIFT (switchable)
• Maximum output level: 20 mW + 20 mW (into 32 Ω load)
• Equivalent input noise (when phantom power off): -125 dBu or less (A-weighted, 150 Ω input, +40 dBu input gain)
• Noise floor (residual noise): –75 dBu
• Control input: FP02 input
• Power:
• AC adapter (9 V DC 500 mA, center negative) (ZOOM AD-16)
• 4 AA batteries (about 3.5 hours continuous operation time when using alkaline batteries)
• USB:
• Connector: Micro USB
• Audio interface operation: 2-in/2-out USB2.0 Full Speed, 44.1 kHz, 16/24/32-bit
• External dimensions: 181 mm (D) × 320 mm (W) × 77 mm (H)
• Weight: 1.56 kg (excluding batteries)